+998 99 202 07 77

VEK LOOSE FLOOR FOR INTERIOR WORKS

Scope of application
It is used for leveling concrete floors and cement screeds in residential premises, public buildings with a floor load of no more than 200 kg/ cm2,
with subsequent fastening of floor coverings (ceramic tiles, textile carpets, plastic coverings, linoleum, parquet, etc.).
It is recommended to perform a high-quality finishing layer. It is made on a cement-sand basis, using highly
effective imported polymer additives. Designed for manual and machine application.

Laying of ceramic tiles – after 3 days; linoleum, carpet, parquet board – after 7 days after pouring the floor, with mandatory control of the residual moisture of the base.
Material consumption
The consumption of the mixture depends on the relief of the base. 1.6 kg/m2 of dry mix with a layer thickness of 1 mm.

Precautions
It is recommended to carry out the work in rubber gloves. If the solution gets into the eyes, it is urgently necessary to rinse them with plenty of water. To protect the respiratory system, use respirators, to protect the visual organs, use safety glasses.
Packing and storage
It is delivered in multilayer paper bags of 20 kg. The shelf life in a dry room in undisturbed original packaging is 12 months.
technical characteristics
Color grey
The temperature of the work is +5 °C…+30°C
Operating temperature -40 °C…+70°C
Layer thickness 1-10 mm
Adhesion of at least 1 MPa
The working time of the solution is 30 minutes
Compressive strength of at least 20 MPa
The amount of water per 1 kg of dry mix is 0.26-0.28 liters
Possibility of walking in 24 hours
Laying of the floor covering in 3-7 days
Spreading capacity 300-320 mm
Consumption at a layer thickness of 1 mm 1.6 kg/m2