+998 99 202 07 77

VEK GLAT PUTTY

Substitute primer used on surfaces covered with concrete, cement or gypsum plaster, on smooth previously painted surfaces as a preparation layer for painting and having a high adhesive capacity.

Creates a flat and smooth surface that does not require a primer before painting and wallpapering. Layer application from 3 mm to 30 mm.

APPLICATION:

Before application, the surface must be cleaned of materials such as dust, grease, etc. The mixture is poured into a container with clean water in an appropriate amount and left for 2-3 minutes.

It is mixed (preferably with a mixer) until the lumps disappear. The ready-to-use solution must be used within 1 hour. Do not add water or gypsum to the prepared solution.

SPECIFICATIONS:

mixing with water; for 7 liters of water 10 kg of gypsum

Usage time: 60 minutes

Curing: Area of ​​application: 120-150 minutes 1 kg/mg (thickness 1 mm. Surface hardness: 40 Shore D The above values ​​may vary depending on external parameters. Must be stored in the original packaging and in a dry place. A maximum of 10 rows is allowed. Type of packaging: Polypropylene bags