+998 99 202 07 77

VEK STANDARD TILE ADHESIVE

Ready-made dry adhesive (mixture) based on cement binder with polymer additives. It is used in internal and facade works for gluing ceramic, faience, tile, marble TILES.

APPLICATION Before use, the surface must be cleaned of dust, grease, paint, etc. If the surface temperature is above +25°C, the surface must be moistened with water. In a container with CLEAR WATER Pour dry glue in an appropriate amount and mix with a mixer with a slow rotation or other means until the Lumps disappear completely. After that, the solution should be left for 10 minutes. Then re-mix for 5-10 minutes and apply.

The finished solution is applied to the surface with a spatula with suitable combs and evenly distributed. Ceramic tiles must be glued to the surface within 15-20 minutes. Ready-to-use solution must be used within 2-3 hours. After the application time has elapsed, water or any other materials must not be added to the solution again. Joints should be grouted after 24-48 hours. Required working environment temperature +5°C/+35°C.

SPECIFICATIONS

Mixing with water: 2.7-3.5 liters per 10 kg of mixture.

Usage time: 120-180 minutes.

Area of ​​application based on the size of the tiles: 4-5. Adhesion strength Sosnovanie: 0.5 MPa. These values ​​are based on operating environment conditions within 23°C (+2°C) heat and 50% (+5%) humidity. The above data may change depending on the conditions of the area where the product is used. When stored in a dry place in the original packaging, the product has a shelf life of 6 months.

Permissible folding (stacking) no more than 10 rows. The basis of the solution ARE Components of cement, therefore do not inhale, avoid contact with skin and eyes.