+998 99 202 07 77

VEK GRANITE GLUE

Ready-made dry adhesive (mixture) based on cement binder with polymer additives. It is used in interior and facade works for gluing ceramic, faience, tile, marble, etc. tiles.

APPLICATION:

Before use, the surface must be cleaned of dust, grease, paint, etc. If the surface temperature is above +25°C, the surface must be moistened with water. Pour dry glue into a container with clean water in an appropriate amount and mix with a slow-speed mixer or other means until the lumps completely disappear. After that, the solution should be left for 10 minutes. Then re-mix for 5-10 minutes and apply.

The finished solution is applied to the surface with a spatula with suitable combs and evenly distributed. Ceramic tiles must be glued to the surface within 15-20 minutes. Ready-to-use solution must be used within 2-3 hours. After the application time has elapsed, water or other materials must not be added to the solution again. Joints should be grouted after 24-48 hours. Required working environment temperature +5°C/+35°C.

SPECIFICATIONS:

Mixing with water: 2.7-3.5 liters per 10 kg of mixture.

Usage time: 120-180 minutes.

Area of ​​application based on the dimensions of the tile: Adhesion strength to the base: 0.5 MPa. These figures are based on operating environments of 23°C (*2°C) heat and 50% (#5%) humidity. The above data may change depending on the conditions of the area where the product is used.

When stored in a dry place in the original packaging, the product has a shelf life of 6 months. Permissible folding (stacking) no more than 10 rows. The basis of the solution is the constituent elements of cement, in this regard, do not inhale, avoid contact with skin and eyes.